If you have watched our cutting dryer, you will find that there is a special part, which is cutting dryer vent. For the big drilling waste management equipment, the vent for our cutting dryer is really different with other equipment. Therefore, we would want to know what the function of vertical cutting dryer vent is, and this is this post’s target.
Not the same with QJ mud cleaner, horizontal vacuum degasser and shale shaker, actually they are all for solid control system grads, while cutting dryer series belongs to drilling waste management grads. In WestPetro, there are LL915 vertical cutting dryer and LL700 cutting dryer for different oil drilling fields. Now we will take a brief expiation about vertical cutting dryer vent.
Just as we talked the topic about vertical cuttings dryer, we said that one of the most important parts for cutting dryers are the shaker screen, which is specially designed for cutting dryer. Even if it is made up of steel, but it is not the same with KS frame steel shaker screen used in shale shaker or mud cleaner. For this special screen, there is a hot potato it, that is to say the screen is easy to be covered by the drilling mud. You know that we will put the cutting dryer into the drilling fields and let it dry the drilling solids so that to prevent the pollution. With the high speed cycle, the drilling solids will be dried and separated by the cutting dryer, if the cutting dryer’s screen is covered by the solids, the whole drying and separating work have to be stopped and check it again.
Therefore, the vent of cutting dryer plays it function. The vent, we also called it as viewing port, it is designed for checking the screen and helix scraper. Generally speaking, in the drying work, we will check the drying screen in some time, the way for us to check it is via the cutting dryer’s vent / view port. By this step, we could have a high working efficiency for the drying work, even if we have to check the screen.
By the way, for the whole drilling waste management work, we need centrifugal sand pump or screw conveyor to transport the drilling solids and feed it into the cutting dryer. Of course, if the solids’ size is too big, we still need centrifugal shear pump to cut it into small sizes, thus could ensure the transporting and separating work goes smoothly.
On the other hand, no matter for cutting dryer or drilling waste management, we have never stop to get the new design for our equipment. In 2015, we have developed newly tricanter centrifuge for slurry oil recovery unit, high frequency vibrating screens for mineral industry. For these new items, we have also introduced several times. Please feel free to contact us if you have any interesting about Westpetro cutting dryer or other related equipment, we will be here to support your any demands.
Happy New Years.