QJ Mud Cleaner Troubleshooting in Separating Work

Frankly to say, mud cleaner is a powerful and popularly used equipment for almost all of the drilling fields, for it is a combination of mud de-sander and mud de-silter, and it is a main part for solid control system; in another word, our QJ mud cleaner could provide the function both of separating the drilling mud and drilling sand, therefore, it is a powerful equipment in oil drilling fields’ work.

Because of its powerful function, we should learn some necessary tips and information to solve the trouble we may meet in the working progress. Please check the following two aspects content about mud cleaner troubleshooting.

QJ mud cleaner in factory
QJ mud cleaner in factory

Mud cleaner troubleshooting 1: Please protect your motor power

Motor power is the core part for every solid control item, besides mud cleaner; there are horizontal vacuum degasser, linear motion shale shaker and vertical cutting dryer. They all have a higher requirement of motor power. For mud cleaner, the main motor power is imported from Italy and it could provide high working power outlet when it started to work to separate the drilling solids. In the working flow, we should pay attention for the motor power’s working condition, and do necessary maintenance for this part after stopped to work.

Mud cleaner troubleshooting 2: Pay more attention for KS steel shaker screen

KS steel shaker screen is one of Westpetro Shaker screen product line, it is popularly used in mud cleaner and linear motion shale shaker. Besides steel shaker screen, we have also developed new items called polyurethane screen, it is the necessary spare part for high frequency vibrating screens in mineral industry.

For mud cleaner, we should pay more attention for its KS steel shaker screen. You will know its importance after leaned the working flow with the following content: generally, we will use centrifugal shear pump to cut the drilling solids into small sizes and then transported by the centrifugal sand pump or screw pump onto the surface of the mud cleaner’s shaker screen. After that, mud cleaner will start the separating work. Just as you know from the content of mud cleaner’s working flow, the ks steel shaker screen will be easily broken by those big sizes drilling solids, even some of the solids have been cut into small sizes by shear pump, they are still dangerous for the shaker screen. Usually, our KS steel shaker screen could work as long as 400 working hours in oil drilling fields. Therefore, if you found there is some broken shaker screen, please exchange it timely.

steel shaker screen
steel shaker screen

At last, we would like to share that our slurry oil recovery unit has been delivered to Indonesia and they will be installed at the bottom of Feb. As the core part of this unit, tricanter centrifuge has been taken a good attention in the working fields. We will also provide the details information after this unit has been installed totally.

Please feel free to let us know if you have any comments about mud cleaner’s troubleshooting, we will response your requirement at the first time.

prev: next:
  • Blog List

  • General Instruction of We...
  • XBSY Centrifugal Sand Pum...
  • General Instruction for M...
  • WestPetro Will Attend Mos...
  • WestPetro Attend 2016 Bei...
  • What’s the Right Centri...
  • What’s the Necessar...
  • What the Equipment Will B...