How to Install Cutting Dryer in 3 Steps?

In last post, we shared some ideas about how to assemble mud cleaner in 3 steps, as the core equipment for drilling waste management, cutting dryer plays an important role in whole drilling waste industry. Here we will share our idea about how to install vertical cutting dryer in 3 steps.

Generally speaking, just like other solid control items, such as horizontal vacuum degasser, linear motion shale shaker, and centrifugal shear pump, vertical cutting dryer is also installed in the factory, which could provide a convenient way for drying the drilling solids in the oil drilling fields.

Verti-G Cutting Dryer in onsite drilling fields
Verti-G Cutting Dryer in onsite drilling fields

How to Install Cutting Dryer in 3 Steps?

Step 1: please prepare the necessary parts for the whole cutting dryer. In WestPetro, there are LL915 vertical cutting dryer in VFD type and LL700 vertical cutting dryer in a small size, but the spare parts are the same style, except for the different sizes. Commonly, the parts for the whole cutting dryer contains steel base, stainless steel screen, oil lubrication system and VFD cuttings dryer control panel. After we finished the spare parts prepared, we could start the next step.

Step 2: in this step, we could start to install the vertical cutting dryer. Firstly, we should fix the steel bare tightly, and then put the stainless steel screen and oil lubrication system on the steel base. Frankly, this part is the core one for the whole vertical cutting dryers. Even if you just saw the two parts, but in the two parts, there are motor power and high speed centrifugal shaker screen in steel style. Anyway, there are more things than you can image.

Step 3: after we finished the installation of main body for vertical cutting dryer, now we will install and adjust the control box – VFD control panel for cutting dryer. Just like VFD decanter centrifuge and tricanter centrifuge, VFD control panel means important for the equipment. With the support of control panel, we could control the item easily. Usually, even in the whole drilling waste management system, we still need this style control panel to make the whole work in a good condition.

When we finished the above 3 steps, we could say that the vertical cutting dryer has been installed well. In this situation, we could delivery this item to our customers. However, as the professional solid control manufacturer, we put the high quality and equipment’s working efficiency as the top level. In WestPetro, even for our classical centrifugal sand pump, which is the core part for solid control system, we will test it before delivery. Therefore, we will test our cutting dryer to check if this item is in a good working condition. Please check the following picture to learn about the testing work for vertical cutting dryer.

vertical cutting dryer is testing
vertical cutting dryer is testing

Please feel free to contact us if you have any interesting or comments about our cutting dryer, your any inquiry will be highly appreciated.

prev: next:
  • Blog List

  • General Instruction of We...
  • XBSY Centrifugal Sand Pum...
  • General Instruction for M...
  • WestPetro Will Attend Mos...
  • WestPetro Attend 2016 Bei...
  • What’s the Right Centri...
  • What’s the Necessar...
  • What the Equipment Will B...